First, the correct choice of magnet material, bearing in mind the situation of iron, iron requirements, the use of the environment and the characteristics of its own separator.
Second, when more material when the iron: iron should be used with continuous row of dump electromagnetic, permanent magnetic separator (RCDC, RCDF, RCYC, RCT, CFLT series)
Third, when the iron-containing material in less time: better to use the manual unloading of iron electromagnetic, permanent magnetic separator (RCDA, RCDB, RCDE and RCY series). Appropriate to reduce the flying height, is conducive to iron.
Fourth, when the dust is more serious use of the environment: the structure should be chosen closed separator, such as RCDB, RCDE, RCDF series of permanent magnetic products and RCY series of products.
V. separator installed in the belt when the machine head: the former because of the momentum and the materials are beneficial in loose iron. However, apart from the bottom of the driving wheel of iron should be non-ferromagnetic material.
VI separator installed in the central belt (both cross-arrangement) is: To improve the effect of iron can be installed in the tape by WCG series under the non-magnetic linear roller.
Seven, for the solenoid can not be adsorbed non-magnetic metal material, should use GJT series metal detector test, police shut down manually after the fish out.
VIII magnet separator has the following characteristics: small, easy to suck big short; cleaning of the easy-to-ball; pickup easy to quiet. High iron requirements of the occasion, should increase the separator's specifications or two-stage iron.
September, when using multi-stage iron: iron suction after the class level should be higher than the iron suction. Otherwise, after the level of bad iron separator.
|
